Developing Raw Images - Pentax 645D Operating Manual

e_kb487.book Page 72 Wednesday, December 8, 2010 9:49 AM

Developing RAW Images

You can convert RAW images into JPEG or TIFF format.
Caution
• Only RAW images captured with this camera can be edited.
Images captured with other cameras cannot be edited on this
camera.
1
4 Select a RAW image and select h (RAW
Development) in the playback mode palette.
2
Select [Developing a Single Image] or
[Developing Multiple Images].
If [Developing a Single Image] is selected, the parameters
recorded in the image file are displayed. You can turn the R dial
to select a different image. Proceed to Step 5.
If [Developing Multiple Images] is selected, the display is switched
to Multi-image Display (p.68).
3
Select the RAW images to
develop.
4
Press the L button and
select [Develop images as
shot] or [Develop images
with modified settings].
72
5
1
MENU AE.L RAW JPEG OK
Develop images as shot
Develop images with
modified settings
MENU OK OK
Use the 23 keys to select
the parameter and use the
45 keys to adjust the
value.
If you select [Develop images as shot]
in Step 4, you can set only File Format,
Recorded Pixels and Quality Level.
Press the 5 key to display the setting screen for White Balance
and Custom Image.
Parameter Value
File Format JPEG/TIFF
i (7264×5440)/k (6528×4896)/
*1
Recorded Pixels n (5376×4032)/q (4224×3168)/
a (3072×2304)
*1
Quality Level C/D/E
Bright/Natural/Portrait/Landscape/
Custom Image Vibrant/Muted/Reversal Film/
Monochrome
F (Auto)/G (Daylight)/H
(Shade)/^ (Cloudy)/JD
(Fluorescent Light Daylight Color)/
JN (Fluorescent Light Daylight
*2
White Balance White)/JW (Fluorescent Light Cool
White)/JL (Fluorescent Light Warm
White)/I (Tungsten Light)/L
(Flash)/f/K (Manual 1 to 3)/K
(Color Temperature 1 to 3)
Sensitivity –2.0 to +2.0
High-ISO Noise
Off/Low/Medium/High
Reduction
Shadow Correction Off/Low/Medium/High
Distortion
Off/On
*3
Correction
40
RAW RAW JPEG JPEG
M
File Format File Format
1 100-0001 100-0001 100-0001 sRGB sRGB
MENU OK
Page
–
p.43
p.43
p.62
p.50
–
p.R32
z
p.R14
z
p.R15
z