Viewfinder And Lcd Panel - Pentax 645D Operating Manual

e_kb487.book Page 20 Wednesday, December 8, 2010 9:49 AM

Viewfinder and LCD Panel

1
Viewfinder
1
1
4 5
10 11 12 13 12 13 14
1 AF frame
2 Spot metering frame (p.45)
3 AF point (p.44)
4 EV bar
Shows the EV compensation
values or the difference
between the appropriate and
current exposure values
when the exposure mode is
set to a or M.
Displays the camera angle
when [Electronic Level Disp.]
is set to O.
20
2 3
1
1
6 7 8 9
15
5 Focus indicator
Appears when the subject is
in focus.
Blinks when the subject is not
in focus.
6 Shutter speed
Underlined when the value
can be adjusted.
7 Aperture value
Underlined when the value
can be adjusted.
8 ISO/ISO AUTO
Appears when the sensitivity
is displayed.
9 Sensitivity
Underlined when the value
can be adjusted.
Displays the number of
recordable images
immediately after shooting.
(Max. display is [999].)
When [Electronic Level Disp.]
is set to O: Displays the
difference between the
appropriate and current
exposure values when the
exposure mode is set to a.
10 Flash status
Appears when the flash is
available.
Blinks when the flash is
recommended or is being
charged.
Memo
• The AF points appear in red (superimposed) when the shutter
release button is pressed halfway.
EV bar
Shows the difference between the appropriate and current
exposure values when the exposure mode is set to a or M. If
the value exceeds the range of the EV bar, the "+" or "–" blinks.
11 Flash Exposure
Compensation (p.59)
12 File Format (p.42)
Appears when the file format is
RAW or RAW+.
Not displayed when the file
format is JPEG.
13 SD1/SD2 slot status (p.42)
Appears when recording is
available.
Not displayed when set to OFF
or RESERVE.
14 AE lock (p.49)
15 Metering mode (p.45)