Multi-Exposure; Interval Shooting - Pentax 645D Operating Manual

e_kb487.book Page 17 Wednesday, December 8, 2010 9:49 AM

Multi-exposure

You can create a composite picture by
taking multiple frames. Select the
number of shots (between 2 and 9),
set [Auto EV Adjustment] to O (On) or
P (Off), and then select [Start
Shooting]. (The default setting is
[2times] and P.)
Caution
• Multi-exposure cannot be used with Exposure Bracketing,
Extended Bracketing, HDR Capture or Interval Shooting at the
same time. The mode set last is used.
• The [Lens Correction] setting (p.R15) is disabled when Multi-
exposure is set.
Memo
• If any of the following operations are performed while shooting, the
pictures that have been already taken are saved and Multi-
exposure is ended.
• The Q, 3, M, |, b, y, Y or n button is
pressed
• The mode dial is turned
• Exposure Bracketing is set

Interval Shooting

A2
Pictures are taken at a set interval
Multi-exposure
from a set time. Set the interval,
Start Shooting
number of shots and start time, and
Number of Shots 2 times
then select [Start Shooting].
Auto EV Adjustment
MENU Cancel OK OK
Interval
Number of
Shots
Start
Interval
Caution
• Interval Shooting cannot be used with Extended Bracketing, Multi-
exposure or HDR Capture at the same time. The mode set last is
used.
• Interval shooting is not available when the exposure mode is set to
p or A mode.
• Interval shooting is canceled when the SD Memory Card has no
more available space.
• If the subject is not in focus with the focus mode set to l (Single
mode) or if the [Interval] setting is too short and the previous image
processing cannot be completed before taking the next picture, no
picture may be taken.
Interval Shooting
Interval
Number of Shots
Start Interval
Start Time
MENU Cancel
2 seconds to 24 hours, 00 minutes and 00 seconds (default
setting: 2 seconds)
Now: 2 to 999 (The default setting: 2 images)
Set Time: 1 to 999
Shooting starts immediately. (default setting)
Now
You can take two or more pictures.
Shooting starts at the set time.
Set Time
Select [Start Time] and set the shooting start time.
A2
Start Shooting
00 00 02 : ' "
A
002images
Now
OK OK
R17