Troubleshooting - Pentax IQZoom 140M Operating Manual

TROUBLESHOOTING
* Is the battery exhausted? Insert new battery. See page 8.
• Is (2) blinking on the LCD panel? The film has been used up.
Insert a new roll. See page 12.
* |s (Е) blinking on the LCD panel? The film has not been
loaded properly. Reload the film. See page 13.
* Did you position the autofocus frame on your subject? See
page 18.
* Did you obstruct the autofocus window with your fingers, hair
or other object. See page 16.
* Is the autofocus window dirty? Wipe it off. See page 18.
2. My printed pictures don't look
very clear.
36