Kenmore 665.1311x Use & Care Manual page 21

Dishes do not dry completely
Dishes are not dry
Use a rinse aid along with the Heated Dry option is
needed for proper drying.
Did you load your dishwasher to allow proper water
drainage? Do not overload. Refer to the "Loading"
section. Use a liquid rinse aid to speed drying.
Are the plastics wet? Plastics often need towel drying.
Is the rinse aid dispenser empty? Refer to the "Rinse
Aid" section.
Did you use an air-dry option? Use a heated drying
option for dryer dishes.
Dishes are damaged during a cycle
Chipping of dishes
Did you load the dishwasher properly? Load the dishes
and glasses so they are stable and do not strike
together from washing action. Minimize chipping by
moving the rack in and out slowly.
NOTE: Antiques, feather-edged crystal, and similar
types of china and glassware might be too delicate for
automatic dishwashing. Wash by hand.
Noises
Grinding, grating, crunching or buzzing sounds
A hard object has entered the wash module (on some
models). When the object is ground up, the sound
should stop. If the noise persists after a complete
cycle, call for service.
Dishwasher exterior is dirty or marked
Marks, smudges or residue on dishwasher exterior
Did you clean the dishwasher with a mild detergent and
cloth or use a stainless steel cleaner on models with a
stainless steel exterior? In most cases, regular use of a
soft, damp cloth or sponge and a mild detergent is all
that is necessary to keep the outside of your
dishwasher looking fresh and clean. If your dishwasher
has a stainless steel exterior, a stainless steel cleaner is
recommended.
21