B1EP07RC
CHECKING AND SETTING THE VALVE TIMING
Engine : BFZ - LFX - RGX
- Belt tension measuring instrument
- Camshaft pulley locating peg
- Crankshaft locating peg
- Square drive
- Remove the protective covers.
- Peg the camshaft pulley at «a» using the tool 7004 - T.G.
- Peg the crankshaft at «b» using the tool 7014 - T.N.
- Check that the pegs can be engaged correctly at «a» and «b».
- Fit the belt in the following order : camshaft pulley, crankshaft pinion, water pump pinion,
tensioner roller.
- Peg the camshaft pulley at «a» and the crankshaft at «b».
- Remove the peg at «b» only.
- Bring the tensioner roller (2) into contact with the belt.
85
TOOLS
: 4099-T or 4122-T
à
: 7004-T.G.
: 7014-T.N.
Tool kit 7004-T
: 7017-T.W.
CHECKING THE VALVE TIMING
SETTING THE VALVE TIMING