Special Features: Tightening Torques (M.dan) - Diesel - All Types - CITROEN XANTIA User Manual

DIESEL - All Types
Engine type
Maximum permissible bow
Gasket surface regrinding
Crankshaft bearing screws :
- Pre-tightening
- Tightening
- Angular tightening
Connecting rod screws :
- Pre-tightening
- Angular tightening
Flywheel screw
Crankshaft pulley screw :
- Pre-tightening
- Angular tightening
Pulley screw at end of camshaft
WARNING : After removing the crankshaft pulley, carry out the following operations : (Except for THY engines).
- Clean the thread (Tap 14X150)
-Fit a NEW screw.
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN )
Engines : DHX - P8C - RHY - RHZ - RHW - THY
DHX P8C
0.07 0.05
- 0.20
1.5 ± 0.1
-
60° ± 6°
4 ± 0.4 7 ± 0.7
51° ± 5° 60° ± 6°
4.5 ± 0.4
- Fit a NEW washer
- Tighten (see table above)
50
CYLINDER HEAD (mm)
RHY RHZ
0.03
- 0.40
TIGHTENING TORQUES (m.daN)
2.5 ± 0.2
-
60 ± 6°
2 ± 0.2
70° ± 7°
5 ± 0.5
4 ± 0.4
51° ± 5°
4.3 ± 0.4
RHW THY
0.05
2 ± 0.2
-
60°±6°
2 ± 0.2
65° ± 6°
7 ± 0.7
51° ± 5°