B1EP11HC
CHECKING AND SETTING THE VALVE TIMING
Engine : THY
- Belt tension measuring instrument
- Crankshaft locating peg
- Camshaft pulley locating peg
- Injection pump pulley locating peg
- Tensioner lever
- Peg the flywheel (behind the engine).
- Visually check the pegging of the following components :
- The camshaft pulley (1).
- The injection pump pulley (3).
- Peg the flywheel (behind the engine).
- Peg the camshaft pulley (1).
- Peg the injection pump pulley (3).
- Loosen the screws (2) and (4), then manually retighten,
then loosen again by 1/6 of a turn.
- Turn the pulleys (1) and (3) to the end of the slots (clockwise).
115
TOOLS
: 4099-T or 4122-T.
: 7014-T.J.
à
: 5711-T.A.
: 5711-T.B.
CHECKS
SETTING THE VALVE TIMING
Tool kit 7004-T
Tool kit 5711-T
: 5711-T.E.