XANTIA- XM
GEARBOX CONTROLS - AL 4 and 4 HP 20 AUTOMATIC GEARBOXES
Engines : LFY - RFV - DHX - XFZ
Adjusting the selection mechanism
4 HP 20
- If the selection mechanism is NEW, pull out the locking key (1) 1/4 of
a turn.
If the selection mechanism is OLD and not set correctly, press on
component (2), without flexing the cable, then release.
- Check the passage through all the gears.
B2CP35FD
AL 4
Adjusting the selection mechanism.
- If the selection mechanism is NEW or removed from the vehicle,
component (1) is locked..
When fitting the selection mechanism, press on component (2),
without flexing the cable, then release. (Component (1) unlocks).
- Check the passage through all the gears.
B2CP37ED
213