CITROEN XANTIA User Manual page 84

XM
AUXILIARY EQUIPMENT DRIVE BELT
Engine : THY
With air conditioning (continued)
NEW BELT.
- ove the roller (3), with tool [3] 5714-T.S (6 mm across the flats) until tool [1] 5714-T.Q (Ø 4 mm) is released.
- Hold the roller (3) in this position and tighten the screw (2) using tool [2]. Tighten to 3.2 m.daN.
- Rotate the crankshaft by 5 turns (Direction of rotation) = 1 turn of the belt.
- Check the tension by inserting the tool [1] (Ø 2 mm) in the hole (5) of the automatic tensioner (4).
- If the tension is not correct, repeat the tensioning procedure.
B1BP051C
77