XM
B1HPOYHC
FITTING DELPHI DIESEL INJECTORS
Engine : P8C
Fitting an injector
The copper seal (1) and the fire seal washer (2) are to be
replaced each time they are removed.
NOTE : Fitting parts of different makes is PROHIBITED.
WARNING : Ensure that the fire seal washer (2) is fitted the
right way round.
- The needle-lift injector (4) is positioned on the cylinder
No. 3.
WARNING : Should the needle lift sensor fail to operate, the
complete injector holder must be replaced.
IMPERATIVE : Do not reset the injector holder (4).
Tighten the injector holder on the cylinder head to :
B1HPOYJC
9 m.daN
156
[1] Tool to remove/refit injectors (2) 7007-T
[2] 7008-T.A Tool kit 4123-T
(3) Tighten lightly to prevent any distortion:
1 m.daN + 20° or 6 m.daN.
B1HPOYGC