Refit (Rfn); Timing/Adjusting Belt Tension (Rfn) - CITROEN XANTIA User Manual

CHECKING AND SETTING THE VALVE TIMING
Engine : RFN
Refit (continued)
- Refit the belt (10) on the pinion (12).
- Hold the belt (10) with tool [3].
- Position the belt (10) in the following order :
- The guide roller (11), the inlet camshaft pinion (9), the exhaust camshaft pinion (8), the water pump (5), the
tensioner roller (6).
NOTE : Make sure that the belt (10) is as flush as possilble with the outer face of the various pinions and rollers.
- Remove the tools [3] and [1].
Timing belt tension
Adjusting the tension
- Turn the roller (6) in the direction of the arrow «b» ; using an Allen key at «a».
- Position the index «c» in its maximum setting at «d».
IMPERATIVE : The index «c» must stand proud of the notch «f» by an angular value of 10°. If it does not,
replace the tensioner roller (6) or the timing belt and the tensioner roller (6)
- Bring the index «c» to its adjusting position «f» by turning the tensioner roller (6) in the direction of the
arrow «e».
WARNING : The index «c» must not stand proud of the notch «f» : if it does, restart the timing belt tensioning operation.
IMPERATIVE : The tensioner roller (6) must not turn while its fixing is being tightened up. If it does,
recommence the adjusting operation.
B1EP14JD B1EP14KC
99