Speakers - HP EliteBook 2170p Maintenance And Service Manual

4. Remove the audio board (3) and cable.
Reverse this procedure to install the audio board.

Speakers

Description
Speakers (include cables and 4 rubber isolators)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service cover (see
b. Hard drive (see
c. WLAN module (see
d. WWAN module (see
e. Keyboard (see
f. Base enclosure (see
Battery on page 56), and then remove the following components:
Service cover on page
Hard drive on page 59)
WLAN module on page
WWAN module on page
Keyboard on page 69)
Base enclosure on page
58)
62)
64)
76)
Component replacement procedures
Spare part number
655792-001
81