HP EliteBook 2170p Maintenance And Service Manual page 90

Remove the speakers:
1. Turn the base enclosure right side up, with the front toward you.
2. Release the speaker cable (1) from the clips built into the base enclosure.
3. Remove the four Phillips PM2.5×5.9 screws (2) that secure the speakers to the base enclosure.
4. Remove the speakers (3).
NOTE:
isolators are crucial to the performance of the speakers.
Reverse this procedure to install the speakers.
82 Chapter 4 Removal and replacement procedures
The speakers include four rubber isolators that are installed in the screw holes (4). These