HP EliteBook 2170p Maintenance And Service Manual page 103

d. WWAN module (see
e. Fan (see Fan on page
f.
Keyboard (see
g. Base enclosure (see
h. System board (see
NOTE: When replacing the top cover, be sure to remove the following components from the
defective top cover and install them on the replacement top cover:
●
Fingerprint reader board (see
●
Media Card reader assembly (see
●
Smart Card reader assembly (see
Remove the top cover:
1. Release the left-side wireless antenna cables (1) from the clips (2) and routing channel built into
the top cover.
2. Release the display panel cable (3) and right-side wireless antenna cables from the clips (4) and
routing channel built into the top cover.
3. Remove the two Phillips PM2.0×5.0 screws (5) that secure the top cover to the display assembly.
WWAN module on page
68)
Keyboard on page 69)
Base enclosure on page
System board on page
Fingerprint reader board on page
Media Card reader assembly on page
Smart Card reader assembly on page
64)
76)
88)
61)
Component replacement procedures
84)
93)
95