Download  Print this page

Mitsubishi Electric JT-SB216JSH-W-E Installation Manual page 10

Hand dryer
Hide thumbs

Advertisement

Switching the air speed switch and heater switch settings
Check the heater ON/OFF settings and air speed HIGH/STANDARD settings with the
customer beforehand.
(The user cannot adjust the settings after installation is complete.)
(The JT-SB216KSN-W-E does not have an air volume switch or heater switch.)
Cautions
1.Remove the mounting screw (1) from
the switch box cover, and remove the
8
switch box cover.
2.Change the settings.
3.After checking the switches, fix the
switch box cover back in its original
position.
1.Engage the groove of the front panel on
the appliance.
2.Reattach the front panel with the front
panel mounting screws (2).
3.Check that the front panel is fitted securely.
9
4.Attach the air filter.
5.Check that the air filter is inserted correctly,
all the way to the back.
6.Attach the drain tank.
Do not install when the product (power cord) is electrified.
Doing so may result in electric shocks.
OFF
STANDARD
Factory default settings
Settings
HEATER
AIR SPEED
Front panel
mounting
screws
10
Switches
Switch box cover
ON
HEATER
Mounting
HIGH
AIR SPEED
screws
OFF / ON
STANDARD / HIGH
Groove
Front panel
Drain tank
Main unit
Air filter

Advertisement

loading

  Also See for Mitsubishi Electric JT-SB216JSH-W-E

This manual is also suitable for:

Jt-sb216jsh-s-eJt-sb216ksn-w-eJt-sb216jsh-h-e