1311875HF4503 Hand dryer MODEL Model Name Display Position. JT-SB116JH-G-NA Power voltage display position. JT-SB116JH-W-NA Unit color (Grey), (White) INSTRUCTION MANUAL For User ■ Read this manual thoroughly before use to ensure the unit is used safely and correctly. After reading the manual, store it in an easily accessible location for future reference. You should not attempt to install the unit yourself, as this may affect the safety and functionality of the unit.
Safety Precautions The following may lead to death or serious Warning personal injury if handled incorrectly Do not modify or disassemble the unit. Do not open the front panel. Doing so may result in an electric shock. Doing so may cause fi res, electric shocks or injury. Do not use at locations where salt damage may occur, or When changing the installation place, consult where corrosive, neutral, or reductive gases are present.
■ Names of Parts ※ Shaded areas in the fi gure indicate antibacterial material. Maintenance switch* Hand drying area Service panel Blue light Main unit Black wall area * Before cleaning the unit, turn the maintenance switch on. The blower does not turn on while cleaning. Sensor Service panel The blue light does not have a sterilizing...
Maintenance Warning Caution Do not allow water to get on the unit. Always turn on the maintenance switch during maintenance work. This may cause electric shocks or malfunctions. Wear rubber gloves when cleaning the unit. Not doing so may result in injuries. Only use cleaning products that are labeled as safe "Safe to use on plastics".
Cleaning the air fi lter Around once a week 1. Remove the drain 2. To remove dust with... 3. Reinstall the drain tank tank and air fi lter and air fi lter Tap gently by hand Use a vacuum cleaner •...
Cleaning the drain pipe At least once a week 1. Open the service panel. 2. Hook your fi ngers into 3. Wipe the inside of the side the handle on the side cover and drain pipe with a cover, and pull it diagonally well-wrung wet cloth.
If you think something has gone wrong Perform the following checks and fi xes. Problem Check Are any lamps in the display on? Turn the maintenance switch off at the service panel. Has a blackout occurred? Turn the ground fault circuit interrupter on. Place your hands all the way inside the hand drying area.