Download  Print this page

Mitsubishi Electric JT-SB216JSH-W-E Installation Manual page 7

Hand dryer
Hide thumbs

Advertisement

Installation (Continued)
1.Remove the drain tank and air filter.
2.Remove the front panel mounting screws (2),
and remove the front panel.
3
3.Remove the terminal cover mounting screw (1),
and remove the terminal cover.
Be careful not to lose the rubber bushing.
Air filter
Front panel mounting screws
Front panel
Rubber bushing
Terminal block
7
Drain tank
Groove
Termial cover
mounting screw
Terminal
cover

Advertisement

loading

  Also See for Mitsubishi Electric JT-SB216JSH-W-E

This manual is also suitable for:

Jt-sb216jsh-s-eJt-sb216ksn-w-eJt-sb216jsh-h-e