Radio Operation
Listening to radio stations
1. Press the POWER/MUTE (
) [POWER on the front panel] but-
ton to turn the unit on.
- When you select a source the unit is turned on.
2. Press the FUNC. or BAND button to select the tuner.
3. Press the BAND button to select a band.
- Press the BAND button until the desired band is displayed,
FM1,FM2, FM3, MW(AM).
4. To perform seek tuning, pressing the TUNE(
M
M >
> for more 1 second.
- The tuner will scan the frequencies until a broadcast with
strong enough reception is found.
- You can cancel seek tuning by pressing the TUNE(
.
. m
m / M
M >
> with quick presses.
5. To perform manual tuning, press the TUNE(
quick presses.
- The frequencies move up or down step by step.
NOTE
• When the selected frequency is being broadcast in stereo, the "
indicator will light.
Auto Search Memory
This function lets you automatically store the six strongest
broadcast frequencies.
1.
Press the BAND button to select the tuner.
•
Press the FUNC. button to select the tuner.
•
2. Press the AS/PS button on the front panel for about 1 second.
- Scanning starts from the currently displayed frequency to
higher frequencies and stops when 6 stations have been
preset or the receivable frequencies have been scanned once.
14
NOTES
• The presetting is not performed if there is no station to be tuned in.
• When automatic presetting is performed, the previous
preset stations are automatically erased.
• To stop the automatic presetting, press the
Storing and recalling broadcast frequencies
You can easily store up to six broadcast frequencies for later recall
with the touch of a button.
. m
.
m /
-/+) or
1. Select the desired frequency
2. Press one of the preset station buttons (1 - 6) for more than 1
seconds. The number of the pressed preset station button is
-/+) or
displayed.
3. Repeat steps 1 and 2 to preset other stations.
button with
-/+)
NOTES
• As F1, F2, F3 have the same frequency range, up to 18 station can be
preset for FM.
• When a station is preset on the preset station button on which another
"
station of the same band has already been preset, the previously preset
station is automatically erased.
To scan the preset stations
Press the AS/PS button on the front panel.
To stop the scanning, press the AS/PS button.
To tune in the preset stations
Press BAND to select the desired band and press the desired
number buttons (1-6) on the remote control.
The number of the preset station button is displayed and the
preset station is received.
BAND
AS/PS
or the
button.