Table of Contents
Advertisement
Radio Operation
Listening to radio stations
1. Press the PWR/MUTE button to turn the unit on.
- When you select a source the unit is turned on.
2. Press the FUNC. button to select the tuner.
3. Press the BAND button to select a band.
- Press the BAND button until the desired band is displayed,
FM1, FM2, FM3, MW(AM).
4. To perform seek tuning, press the
- The tuner will scan the frequencies until a broadcast with
strong enough reception is found.
- You can cancel seek tuning by pressing the
presses.
5. To perform manual tuning, press and hold the
second. And then press the
- The frequencies move up or down step by step.
NOTES
• When the selected frequency is being broadcast in stereo, the "
indicator will light.
Auto Search Memory
This function lets you automatically store the six strongest
broadcast frequencies.
1. Press the FUNC. button to select the tuner.
2. Press the AS/PS button on the front panel for about 1 second.
- Scanning starts from the currently displayed frequency to
higher frequencies and stops when 6 stations have been
preset or the receivable frequencies have been scanned once.
14
/
with quick presses.
/
with quick
/
for 1
/
with quick presses.
"
NOTES
• The presetting is not performed if there is no station to be tuned in.
• When automatic presetting is performed, the previous
preset stations are automatically erased.
• To stop the automatic presetting, press the
To scan the preset stations
Press AS/PS button on the front panel.
To stop the scanning, press AS/PS button.
To tune in the preset stations
Press BAND to select the desired band and press the desired
number buttons (1-6).
The number of the preset station button is displayed and the
preset station is received.
Storing and recalling broadcast frequencies
You can easily store up to six broadcast frequencies for later recall
with the touch of a button.
1. Select the desired frequency
2. Press one of the preset station buttons (1 - 6) for more than 1
seconds. The number of the pressed preset station button is
displayed.
3. Repeat steps 1 and 2 to preset other stations.
NOTES
• As F1, F2, F3 have the same frequency range, up to 18 station can be
preset for FM.
• When a station is preset on the preset station button on which another
station of the same band has already been preset, the previously preset
station is automatically erased.
BAND or
AS/PS
the
button.
Advertisement
Table of Contents
