LAC-M8600R_ENG ENGLISH CAR CD/MP3/WMA Receiver OWNER’S MANUAL MODEL : LAC-M8600R Please read this instruction booklet carefully and completely before connecting, operating or adjusting this product.
Safety note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety note • A defective or soiled disc inserted into unit can cause sound to drop out during playback. • Handle the disc by holding its inner and outer edges. • Do not touch the surface of the unlabeled side of the disc. Do not stick paper or tape etc.
Before use Detachable front panel The front panel of this unit can be detached to prevent theft. 1 Press the (RELEASE) to open the front panel. 2 Hold the left part the front panel. 3 Pull the front panel. 4 Place the front panel in the supplied protective case. Front panel Protective Case Attachable front panel...
Remote control POWER [PWR] / MUTE SELECTION [MENU/SEL] SOURCE [SRC] PLAY / PAUSE B/X INTRO SCAN [SCAN] SHUFFLE [SHF] • MP3 TRACK +10 • FOLDER UP • CD SKIP / SEARCH ?m m • SEEK / TUNE ?m m [BAND] VOLUME UP / DOWN NUMBER [#]...
Installation Basic Installation Before installing, make sure that the ignition-switch is set to Bend the claws OFF and remove the terminal of the car battery to avoid according to short-circuiting. the thickness of the 1 Remove the existing receiver unit. dashboard 2 Make the necessary connections.
Connection diagram Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits. PHONE MUTE (ORANGE) GROUND(-) (BLACK) DIMMER (PINK) DIMMER SWITCH TO IGNITION (RED) IGNITION SWITCH TO BATTERY(+) (YELLOW) POWER ANTENNA (BLUE) AMPLIFIER BATTERY...
Connection Speaker Connections From antenna To the wiring of the vehicle colors of leads. • BLACK : This lead is for the ground connection. • ORANGE : This lead is for the phone line connection. • PINK : This lead is for the dimmer line connection.
Basic operation Turning the unit on Press the PWR/MUTE (POWER/MUTE on the remote control) or any other button. Note When you insert the CD in the CD slot, the unit turns on. Turning the unit off Press and hold the PWR/MUTE (POWER/MUTE on the remote control) for more than 1.2 seconds.
Basic operation Changing the monitor angle Press and hold the TILT to adjust the front panel to an easily viewable angle. • The angle of front panel can be adjusted up to 3 steps. • The adjusted the LCD panel angle will be memorized and the monitor panel will automatically return to this angle the next time the monitor panel is opened.
Basic operation Using the EQ (Equalizer) The equalizer lets you adjust the equalization to match the acoustic characteristics of the car’s interiors desired. Press the EQ/WOW/XDSS repeatedly. The indicator lights up in the following order. POP t Classic t ROCK t JAZZ t VOCAL t SALSA t SAMBA t USER1 t USER2 t OFF •...
Basic operation XDSS/XDSS+ (Extreme Dynamic Sound System) Press and hold the EQ/WOW/XDSS to select XDSS or XDSS+ XDSS t XDSS+ t SRS (FOCUS t TRU BASS t 3D-STEREO t WOW) t By pass XDSS/XDSS+ : Improve the treble, bass sound. SRS (Sound Retrieval System) 1 Press and hold the EQ/WOW/XDSS to select SRS.
4 When the Bluetooth phone displays the device name, select the device. 5 The Bluetooth phone displays the PIN code enter screen, enter the PIN code. LG CAR AUDIO PIN CODE : 1234 6 When your unit successfully paired with your Bluetooth phone, the flashing of indicator stops.
Bluetooth operation Answering and Ending a call Your unit, Bluetooth phone, or both may ring when you receive a call, press the SEND to answer a call. To end a call, press the BAND/END. Rejecting a call When your unit rings, press the BAND/END. If “Rejecting”...
Bluetooth operation Dial using a number from the list : Dial last answered? Your unit keeps a record of your recently received and display. 1 Press the SEND. 2 Push the VOL./MULTI toward up or down to select the “Dial last answered?” menu. 3 Press the SEND.
4 When the Bluetooth device displays the device name, select the device. 5 The Bluetooth device displays the PIN code enter screen, enter the PIN code. LG CAR AUDIO PIN CODE : 1234 6 When your unit successfully paired with your Bluetooth device, the flashing of indicator stops.
Bluetooth operation GAP is short for Generic Access Profile. This is a basic profile of Bluetooth wireless technology. HFP is short for Hands-Free Profile. This profile is used for hands-free phoning with the devices featuring Bluetooth wireless technology. HSP is short for Head Set Profile. This profile is used for connecting headset and communication terminal wireless technology.
Radio operation Listening to radio stations 1 Press the SRC to select the radio. 2 Press the BAND/END repeatedly to select a band. The indicator lights up in the following order. FM1 t FM2 t FM3 t MW(AM) 3 Seek tuning : Push the VOL./MULTI toward left or right. (Press the ?m m M M? the remote control.) The tuner will scan the frequencies until a broadcast with strong enough reception is found.
RDS operation RDS Display options In normal RDS operation the display will indicate the station name. Pressing the IMAGE/DISP enables you to cycle through the various data types in the following sequence: (CT t FREQUENCY t PTY t RT t PS) •...
RDS operation RDS TA function To switch on or off the TA (Traffic Announcement) function, press the TA/AF/REG repeatedly. • TA ON Traffic programs and announcements can be automatically received using TP/TA features. • TA OFF Traffic programs and announcements can not be received using TP/TA features. RDS AF/REG function To switch on or off the AF function (Alternative Frequencies) or the REG (Regional Network Tracking) function, long press repeatedly the TA/AF/REG more than 2 seconds.
CD/MP3/WMA operation Playing an Audio CD and MP3/WMA Disc The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 26. If you change the source, CD play also stops (without ejecting the CD). Next time you select “CD”...
CD/MP3/WMA operation Random 1 Press the SHF during playback. The FOLDER SHF appears in the display window. (The current selected folder on the disc is played randomly.) The SHF ALL appears in the display window. (All of the music on the disc is played randomly.) Press and hold the SHF for about 1 seconds during playback.
Troubleshooting Symptom Cause Correction Leads and connectors are not Confirm once more that all Power doesn’t turn on. properly connected. connections are correct. The fuse is blown. Rectify the problem that caused The unit doesn’t operate. the fuse to blow, and then replace it.
Specfications MP3/WMA Disc compatibility with this unit is limited as follows: 1. Sampling Frequency / 8 - 48kHz (MP3), 22.05 - 48kHz (WMA) 2. Bit rate / within 8 - 320kbps (include VBR) (MP3), 32 -320kbps (WMA) 3. CD-R/CD-RW file system should be “ISO 9660” 4.
Mobile phone list and manufacturing company applicable Company list Company list Nokia 8910i LG KG800 Nokia 6021 LG KU730 Nokia 3230 U8210 Nokia 3650 KP-4000 Nokia 6210i Motorola E1000 Nokia 6310i Motorola V600 Nokia 6230 Motorola V3 razor Nokia 6230i...