Table of Contents
Advertisement
SOUND Adjustment
Using the EQ (Equalizer)
The equalizer lets you adjust the equalization to match the
acoustic characteristics of the car's interior as desired.
There are 7 stored equalizer curves which you can easily recall at
any time.
Here is a list of the equalizer curves:
• EQ POP : Reproduces pop music acoustics.
• EQ CLASSIC : Reproduces orchestral music acoustics.
• EQ ROCK : Reproduces rock music acoustics.
• EQ JAZZ : Reproduces jazz music acoustics.
• EQ VOCAL: Reproduces vocal music acoustics.
• EQ USER 1 : Selects an initial user mode.
• EQ USER 2: Selects an initial user mode.
1. Press EQ on the front panel to select the equalizer.
2. Press EQ repeatedly to choose between the following
Equalizer settings.
POP → CLASSIC → ROCK → JAZZ → VOCAL → USER EQ1
→ USER EQ2 → FLAT (No display) → POP....
MUTE
1. Press MUTE [POWER/MUTE (
2. To cancel it press MUTE [POWER/MUTE (
XDSS (Extreme Dynamic Sound System)
Press XDSS button to reinforce treble, bass and surround effect.
SELECTION (SEL) Button
1. WAY
2. WAY
)] to cut the sound.
)] again.
NOTE
The unit can adjust the bass, middle and treble in the USER EQ1
or USER EQ2.
Basic Operation
Turn right
VOL
Increase the volume level.
BAS
Increase the bass level.
MID
Increase the Middle level.
TRB
Increase the Treble level.
BAL
Decrease the level of the left speaker(s). Decrease the level of the right speaker(s).
FAD
Decrease the level of the front speaker(s). Decrease the level of the rear speaker(s).
1.
Select the USER EQ1 or USER EQ2 using the EQ button
2.
Press the SELECTION (SEL) button repeatedly to select the mode you want to
adjust from volume, bass, middle treble, balance and fader. The mode indicator
lights up in the following order.
VOL
MID
TRB
BAS
3.
Turn the CONTROL UP/DOWN left or right (or press VOLUME (
the remote control) to adjust the sound quality.
1.
Press the SELECTION (SEL) button repeatedly to select the mode you want to
adjust from volume, balance and fader. The mode indicator lights up in the fol-
lowing order.
VOL
BAL
2.
Turn the CONTROL UP/DOWN left or right (or press VOLUME (
the remote control) to adjust the sound quality.
Turn left
Decrease the volume level.
Decrease the bass level.
Decrease the Middle level.
Decrease the Treble level.
BAL
FAD
/
) on
FAD
/
) on
13
Advertisement
Table of Contents
