Radio Operation - LG LAC-M8600 Owner's Manual

Car cd/mp3/wma receiver
Table of Contents

Advertisement

Radio operation

Listening to radio stations
1 Press SRC to select the radio.
2 Press BAND/END repeatedly to select a band.
The indicator lights up in the following order. FM1 t FM2 t FM3 t MW(AM)
3 Seek tuning : Push VOL./MULTI left or right. (Press
control.) The tuner will scan the frequencies until a broadcast with strong enough
reception is found.
Manual tuning : Push VOL./MULTI repeatedly up or down.
(Press the
?m m/M M?
repeatedly.) The frequencies move up or down step by step.
Auto search memory
This function lets you automatically store the 6 strongest broadcast frequencies.
1 Press SRC to select the tuner.
2 Press and hold AS/PS for more than 1 second.
Scanning starts from the currently displayed frequency to higher frequencies and stops
when 6 stations have been preset or the receivable frequencies have been scanned
once.
Storing and recalling broadcast frequencies
You can easily store up to 6 broadcast frequencies for later recall at the touch of a
button.
1 Select the desired frequency.
2 Press one of the preset station 1 ~ 6 for more than 1 second.
The number you have pressed will flash in the preset number indicator and then remain
lit. The selected radio station frequency has been stored in the memory.
3 Repeat steps 1 and 2 to preset other stations.
The next time you press the same preset station 1 ~ 6, the radio station frequency is
recalled from the memory.
Note
As FM1, FM2, FM3 have the same frequency range, up to 18 stations can be preset for FM.
When a station is preset on the preset station button on which another station of the same
band has already been preset, the previously preset station is automatically erased.
To scan the preset stations
Press AS/PS. To stop the scanning, press AS/PS.
To tune in the preset stations
Press the BAND/END to select the desired band and press the desired number (1-6).
The number of the preset station 1 ~ 6 is displayed and the preset station is received.
on the remote control for more than 2 seconds and then
20
on the remote
?m m M M?

Advertisement

Table of Contents
loading

Table of Contents