Reference; Troubleshooting - LG LE2116D Owner's Manual

REFERENCE

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.
Symptoms
The system power
does not turn on.
The system power
is turned on but no
video data is dis-
played on the moni-
tor.
The camera num-
bers are displayed
on the screen but
the camera images
are not
displayed.
The camera video is
shown on the screen
but the system does
not record the video.
It is impossible to
search through the
recorded video.
66
Check the power cable is connected correctly.
Check the input voltage is correct.
If the system power does not turn on even if the power cable is con-
nected correctly, please contact the service center.
Check the monitor power cable is connected properly.
Make sure the monitor is turned on.
Check the video output cable of the LG DVR is properly connected to the
monitor.
Check the selected monitor type (see page 19).
Unplug the power cable and plug in again.
Check the camera video output is connected to the DVR system cor-
rectly.
Check the power cable on the camera is connected correctly.
Check there is no problem with the video cable connection from the cam-
era to the LG DVR system.
Turn off the DVR system and turn it on again.
Check the recording mode in the record setting menu.
Check the HDD detection status in the System Information window.
If the HDD detection status is abnormal, check the HDD formatting and
the connection of the HDD.
Check the recordable disk space in the HDD.
Check the overwrite option in the setup menu for overwrite recording.
Check if there is recorded video data at the time that you are trying to
search on the table.
If there is no recorded video data, check the recording mode in the
record setting menu.
Check the HDD detection status in the system information window.
If the HDD detection status is abnormal, check the HDD formatting and
the connection of the HDD.
Check the user type. The search function is not available for a normal
user.
Resolutions