Camera Settings - LG LE2116D Owner's Manual

Camera Settings

Camera
The channel name, covert and input audio channel
settings are configured.
Ch: Displays the channel number.
Name: Enter the channel name using up to 12
characters.
- b/B/v/V: Select a character.
- ENTER: Confirms your selection.
- ESC: Exits the virtual keyboard menu.
Covert: You can set the camera conditions to
prevent operation by other users. If the covert
option is set to ON, "LG logo" is displayed on the
live window with POWER or NORMAL user.
Audio: You can hear from the selected input audio
channel.
Video Adjustment
Adjust the brightness, contrast and color settings
of each camera channel. You can see the settings
screen from the preview windows.
Channel: Selects the desired channel to adjust.
Brightness: Adjust the brightness value from 0 to
100 for the selected channel.
Contrast: Adjust the contrast value from 0 to 100
for the selected channel.
Color: Adjust the color value from 0 to 100 for the
selected channel.
26
PTZ
Settings for the PTZ cameras connected via the data
port of the RS-422/485 terminal.
Channel: Selects the desired channel to set the
connected PTZ camera.
Port: Selects the connected data port of the
RS-422/485 terminal on the rear panel. The DATA
2 port is used to control the PTZ camera connected
to DVR or to control by using the LKD1000 control-
ler. If you want to use the PTZ camera via DATA
2 port, you should set the DVR ID to NONE on
the system setup menu. If you use the LKD1000
controller to control the DVR via DATA 2 port, you
should set the DVR ID number(1~16) on the sys-
tem setup menu.
Control ID: Selects the PTZ camera ID from 00 to
255. Make the same settings as the PTZ camera.
Protocol: Selects the protocol supported by PTZ
camera.
Baud Rate: Selects the communication speed.
(1200, 2400, 4800, 9600, 19200, 38400, 57600 or
115200)
PTZ Test: After the PTZ setting, you can test the
pan/tilt function for the selected PTZ camera. You
can see the test screen from the preview windows
on the right side of the PTZ test option.
- b / B: Test the pan direction.
- v / V: Test the tilt direction.
Note:
The supported PTZ camera list is on page 69 for
reference.