Please beware of the following precautions before installing the DVR.
• Avoid positioning the product in any place where the unit may come into contact with moisture, dust, or soot.
• Avoid placing in direct sunlight or near heating appliances.
• Keep the product away from electric sparks or magnetic substances.
• Avoid temperature extremes (recommended operating temperature is between 0°C - 40°C).
• Do not place any conductive material through the ventilation grills.
• Keep the system turned off before installation.
• Ensure enough space is left for cable connections.
• Place the system on a solid surface with sufficient air ventilation. Avoid any surface that vibrates.
• Placing the system near electronic devices such as a radio or a TV may cause the product to breakdown.
• Do not disassemble the product without seeking assistance from LG Electronics.
• Do not place any heavy object on the system.
•
Prevent any substances from being inserted into
the system.
-
This may cause system breakdown.
•
Install the system in a place with sufficient air ven-
tilation.
-
Keep at least 15cm distance between the
back of the system and the wall, and at least
5cm distance between the side of the system
and the wall.
•
Do not install the system in a place with high
magnetic, electric wave, or wireless devices such
as a radio or a TV.
-
Do not install the system in a place with mag-
netic objects, electric frequencies, or vibration.
•
Do not place any heavy object on the system.
-
This may cause system breakdown.
•
Install the system on a stable, level surface.
-
The system may not operate properly.
•
Install the system in a place with appropriate
moisture and temperature levels.
-
Avoid installing the system in a place with high
(over 40°C) or low (under 0°C) temperature.
•
The system can be damaged from a strong
impact or vibration. Avoid throwing objects within
the vicinity of the system.
•
Avoid direct sunlight or any heating appliances.
-
Recommended operating temperature is over
0°C (32°F).
CAUTION
•
Ventilate the air inside the system operation room,
and tighten the system cover firmly.
-
System breakdown may be caused by an
inappropriate environment.
It is recommended to use AVR (Automatic Voltage
Regulator) for a stable power supply.
It is recommended to coil the core-ferrite around
the connector of the system to avoid electromag-
netic interference.
•
The outlet must be placed on the ground.
•
If there is strange sound or smell, unplug the
power cable immediately and contact the service
center.
-
This may cause fire or electric shock.
•
In order to maintain stable system performance,
have your system checked regularly by the ser-
vice center.
-
LG Electronics is not held responsible for sys-
tem breakdown caused by user mishandling.
-
There is a risk of explosion if a battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
•
Do not overturn the product during use.
5