Repairs; Tools And Accessories; General Disassembly - Krups EF 472 Service Manual

This section con-
tains special safety
and assembly notices.
Disregarding them may
lead to injuries and dam-
ages.
If necessary empty
the water system
first (see page 12).
Before disassembly,
disconnect the
mains plug - the coffee
machine must be voltage
free.
16
R E P A I R S
5 R E P A I R S
The components of the coffee machine are mostly connected with latches, meaning
without screws.
When loosening these connections, proceed with care and patience to avoid
causing any damage.
Designation of spare parts
The components in the following illustrations are indexed with position numbers. The
corresponding designation and spare part number are listed in section "Spare parts" on
page 40.
5.1 Tools and accessories
With the following assortment of tools, all repairs described can be made.
• Oval­screwdriver
• TORX­screwdriver
(TX6, TX10, TX20, TX25)
• Screwdriver with approx. 4 mm tool tip
• Hexagonal wrench SW 4
5.2 General disassembly
General disassembly
­ gives access to the important machine components
­ is required for the following repair instructions.
Depending on the repair done the machine does not have to be fully disassembled.
Service Manual EF 472
• Flat wrench SW 14, 10 mm AF
• Torque wrench
• Long­nosed pliers
• Beaker and towel to catch and wipe
away leaking water