With the phased array probe coupled to a test piece, there are various
ways to view the resulting scans and measured data.
Press
to choose between A-Scan, Sector (or Linear) Scan, or both A
and Sector (or Linear Scan).
Press
to access the DISPLAY menu and determine the measured
results displayed as follows :
•
Link the A and Sector (or Linear) Scans Vertical Size –
then set ASCAN MODE to BUD (Beam Ultrasonic Depth)
•
Display Leg Lines –
•
Control the On-Screen Beam Cursor - press
Right Knob.
Viewing Scans
DISPLAY then BACKGRND, COLOR LEG on.
VIEW
two times then
16
16