5.1.3 Downloading Firmware
Here explains downloading firmware. This section shows how to download bin file(∗.bin), which is
distributed from EPSON Co. according to the necessity, to the camera.
1. Perform 1 to 3 procedures in section 5.1.1, and execute the adjustment program.
2. Following screen is indicated.
3. Press Firmware button(for downloading).
4. Following screen appears.
Open
Look in:
§§§§§«ßæë
§§§§§«ßæë
File Name(N):
Files of Type(T):
5. Input directory on the hard disk or FD, which currently maintained Firmware is stored, into Drive
A, and select Firmware and press Open(O) button.
6. Since the screen to confirm the selection appears, press Y(Yes).
Rev. A
Button for Downloading
Figure 5-2. Button Location for Downloading
Figure 5-3.Selecting Firmware File
PhotoPC700
Chapter5 Adjustment
Open
Cancel
5-4