Removing A Memory Card; Mounting And Removing A Lens; Mounting M (Bayonet) Mount Lenses - Epson R-D1 User Manual

Removing a memory card

1. Make sure the SD memory access LED is unlit, and then open the
memory card cover.
Caution:
c
Never remove a memory card while the access lamp is on. Doing so may
cause data in the card to be lost or damaged.
2. Push the memory card down until it clicks. When you release your
finger, the SD memory card pops out.
Note:
If the memory card is not ejected, push the memory card down again.
3. Remove the memory card.
4. Close the memory card cover.

Mounting and Removing a Lens

You can use M (Bayonet) mount lenses on the camera. In addition, you
can also use L mount lenses by attaching the optional M-Bayonet
adapter ring.
Caution:
c
❏ Some M/L mount lenses cannot be used because of the structure of
the camera. For example, lenses with external dimensions
exceeding 20.5 mm cannot be used with this camera.
Lenses that cannot be used include:
- HOLOGON 15 mm F8
- SUPER ANGULON 21 mm F3.4
- SUPER ANGULON 21 mm F4
- ELMARIT 28 mm F2.8 (earliest model)
-F2 (Dual Range SUMMICRON)
When you mount a collapsible lens, do not collapse the lens after
mounting it. Collapsing the lens into the camera by force or
mounting the lens while it is collapsed may damage the camera or
the lens.
Lenses that can be used but must not be collapsed include:
- HEKTOR 50 mm F2.5
- ELMAR 50 mm F3.5
❏ Even with the same lens, the image quality using this camera may
differ from that of an image taken with an analog camera.

Mounting M (Bayonet) mount lenses

1. Match the red mark on the camera body with the red mark on the
lens-barrel.
Caution:
c
Do not insert your finger into the camera or EM mount.
17
Getting Started
1
1
1
1
1
1
1
1
1