Using Your Remote Starter
setting off the alarm.
Remote Start Safety Features
For safety and security reasons, the CA-630 will shut off the vehicle
during remote start if any of the following occur:
• The vehicle hood is opened
• The brake is pressed before the vehicle ignition is turned on
with the key
• The engine reaches 3 times its normal idle*
• The alarm is triggered
As a safety precaution, the vehicle will shut off if left unattended for 12
or 25 minutes, depending on the time preset by your installer.
Entering the Vehicle While It is Running via Remote Start
1. Press UNLOCK to unlock the door(s) and turn off the alarm
system (if it is not already off).
2. Enter the vehicle. Do not press the brake pedal.
3. Insert the key into the ignition and turn to the ON position.
4. Press the brake pedal. The remote starter disengages and the
vehicle will operate normally.
Pre-Heating or Pre-Cooling the Interior of the Vehicle
Before exiting the vehicle, set the temperature controls to the desired
setting and operation. After the CA-630 starts the vehicle, the heater
or air-conditioning will activate and heat or cool the interior to your
setting.
Using the "Quick-stop" Feature
If you want to make a short stop and leave your vehicle running (to keep
the interior warm or cool, for instance), the quick stop feature allows
you to do this while keeping your vehicle secure and your keys with you.
To engage quick stop:
1. Stop the vehicle and place the transmission in PARK.
2. With your foot off the brake pedal, press the START button on
the remote control, the parking lights will turn on, indicating that
the vehicle is now running via remote start.
3. Remove the keys from the ignition and exit the vehicle. Press
LOCK to arm the alarm system if desired.
Note: Do not leave children or animals unattended in the vehicle
when using the quick stop feature.
CA630owners.p65
(cont'd)
7
7
10/17/03, 4:30 PM
Need help?
Do you have a question about the CA-630 and is the answer not in the manual?