Using Valet Mode; Using Your Remote Starter; Starting Your Vehicle; If Your Vehicle Stalls Or Does Not Start - Code Alarm CA-630 Owner's Manual

6
Using Your Remote Transmitter

Using Valet Mode

If the Passive Arming feature is enabled on your system, Valet mode
temporarily prevents the alarm system from arming automatically.
This is useful when fueling or servicing your vehicle.
To enter Valet Mode:
With the vehicle ignition on, press the LOCK button. The blue
dashboard warning light (status indicator) will turn on for one second,
then turn off. This indicates that the system is in Valet mode. Once the
ignition is turned off, the status indicator will emit a quick double-flash
pattern.
Note: In Valet mode, all keyless entry, convenience and remote start
features operate normally.
To exit Valet Mode:
With the vehicle ignition on, press the UNLOCK button. The blue
dashboard warning light (status indicator) will turn on for one second,
then turn off. This indicates that the system has exited Valet mode.
Hint: To prevent your security system from automatically arming while
unloading or refueling your vehicle, without placing the system in
Valet mode, simply press the disarm button on your remote control
transmitter after turning the ignition key off. Doing so places your
system into a temporary or one time Valet mode. Next time you exit
your vehicle the system will arm in the normal manner.

Using Your Remote Starter

Starting Your Vehicle

The remote start function is activated by pressing and holding the
START button for 2 seconds on the remote control. The system will
check the vehicle to ensure that it is safe to start, and if all safety
parameters are correct, the engine will start within 5 seconds (diesel
engines will take longer.) Press and hold START again to turn off the
vehicle.

If your vehicle stalls or does not start...

If the vehicle stalls or does not start, the CA-630 will pause 5 seconds,
then try 3 more times to start the vehicle (a total of four attempts). The
system pauses 5 seconds between each start attempt. If the vehicle
does not start after the fourth attempt, the CA-630 will abort the start
process.
Your vehicle can be started by remote control whether the alarm is
armed or disarmed. When the alarm is armed, the impact sensor turns
off when the vehicle is started to prevent the engine vibration from
CA630owners.p65
(cont.)
6 10/17/03, 4:30 PM