AEG DVD 4611 HC Operation Manual page 67

Front Speaker; Center Speaker; Rear Speaker; Subwoofer
NOTE:
The „Center Speaker" and "Rear Speaker" menus can only be selected if the
"5.1 CH" option is activated in the "Downmix" menu.
Here you can set the characteristics of the loudspeakers.
Large: The loudspeaker produces bass and treble sounds.
Small: The loudspeaker produces only treble sounds.
Off: The loudspeaker does not produce any audio signals.
Dialog
NOTE:
The „Dialog" menu is only available if the „LT/RT" option or the „Stereo"
option is activated in the „Downmix" menu.
In the „Dialog" menu it is possible to adjust the loudspeakers of the dialogs.
Increase the volume of the dialogs with the Cursor button „ " or reduce the
volume with the Cursor button „ ".
D.R.C.
With this function you can limit the maximum volume that can be set in order to
prevent damage to your loudspeakers.
On: The maximum volume that can be set is limited.
Off: The limit for the maximum volume that can be set is switched off.
ATTENTION:
If „DRC" is switched off it is possible to turn up the volume to such an
extent that the loudspeakers may be damaged.
Auto: Automatic restriction of the maximum volume that can be set.
Digital Audio
Digital Output
Here you specify the settings for the digital Audio output.
SPDIF Off: Output of an analogue Audio signal, but no digital signal.
All: Output of a digital Audio signal. Use this setting if your amplifi er is no
two-channel stereo amplifi er.
PCM only: Output of a digital Audio signal that is converted to a 2-channel
signal. Use this setting if your amplifi er is a two-channel stereo amplifi er.
Changing the default settings Themen
67