5.
To set the minute, press the RESET
button until the desired minute appears.
Quick setting
RESET button until the desired
minute appears.
6.
To end the adjustment, press the SEL
button.
The display will stop flashing
automatically and the adjustment will be
cancelled if the button is not pressed for
about 30 seconds.
As you turn off the ignition switch during
the presetting procedures, the preset data
just before turning off the ignition switch
will be registered.
The clock will be reset 1:00 if the battery
is disconnected.
press and hold the
Gauges, Indicators & Displays
Instruments & Controls
33