Honda CBR1000RR 2006 Owner's Manual page 193

If You Have a Flat Tire
Installation
1. Install the side collars and position the
wheel between the fork legs. Insert the
front axle shaft from the left side,
through the left fork leg and wheel hub.
2. Align the end of axle shaft ( ) with the
surface of fork leg ( ).
LEFT FRONT
(6) end of axle shaft
(7) surface of fork leg
184
Taking Care of the Unexpected
6
7
(8)
(7)
(6)
(8) front fork
spacers
3. Tighten the axle pinch bolts on the left
fork leg to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
4. Tighten the front axle bolt to the
specified torque:
58 lbf·ft (79 N·m , 8.0 kgf·m)
5. Make sure that the front fork spacers
( ) are installed into the caliper bracket 8
properly.
6. Install the right and left brake caliper
onto the fork leg.
To avoid damaging the brake pads,
carefully fits the brake disc ( )
between the pads.
7. Install the caliper fixing bolts and
tighten to the specified torque:
33 lbf·ft (45 N·m , 4.6 kgf·m)
9