Honda CBR1000RR 2006 Owner's Manual page 191

If You Have a Flat Tire
2. Raise the front wheel off the ground by
placing a support block under the
engine.
3. Remove the fixing bolts ( ) and
remove the right and left caliper
assemblies ( ) from the fork legs. 2
To avoid damage to the brake hose
during removal, support the caliper
assembly so that it doesn't hang from
the hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on
the disc or pad surfaces. Any
contamination can cause poor brake
performance or rapid pad wear after
reassembly.
182
Taking Care of the Unexpected
1
4. Loosen the right and left axle pinch
bolts ( ) and remove the front axle bolt 3
( ). 4
RIGHT FRONT
(4)
(3) axle pinch bolts
(4) front axle bolt
(3)