Bunn CDS-2 Operating & Service Manual page 4

USER NOTICES (CONT.)
AFTER CLEANING &
BEFORE REASSEMBLY
1. Apply lubricant* on lip of auger seal where
contact is made with cooling drum.
2. Apply lubricant* on outside surface of
cooling drum seal or inside bore of hopper.
3. Apply lubricant* over o-rings on faucet spool
before inserting into faucet housing.
* Refer to product literature for Bunn
approved lubricant.
2
LUBRICATION
27664.0000D 5/97 © 1996 BUNN-O-MATIC CORPORATION
27664.0000
Design Pressures: High 210 Low 32
1
Type R404A, Amount 9.5 oz(269g)
Design Pressures: High 215 Low 40
3
Design Pressures: High 320 Low 44
28519.0000 (CDS-3 Prior to S/N CDS0019500)
Design Pressures: High 380 Low 52
4
CHARGE
Type R22, Amount 8.4 oz
27444.0000 (CDS-2 Only)
CHARGE
29373.00000 (CDSA-2 Only)
CHARGE
Type R404A, Amount 25 oz
CHARGE
Type R404A, Amount 22 oz
29424.0000 (CDS-3 S/N CDS0019500 - UP)
27646 022500