Viewing Live Video
To turn off the [REC] lamp during recording
The Color Camera [REC] lamp lights
during recording. The following steps
allow you to keep this lamp off at all
times.
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Setup/Info] and press [
confirm the entry.
3. Use the [ , ] buttons to select
[Camera LED].
4. Use the [ , ] buttons to select
"OFF".
The lamp will now remain off at all
times.
Selecting Audio2 input
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Audio] and press [
confirm the entry.
3. Use the [ , ] buttons to select
[Audio2 Select].
4. Use the [ , ] buttons to select
"INCAR", "WMIC" or "LINK
CAM"
INCAR :
Sound input through the [IN CAR
MIC] terminals
WMIC (Wireless Microphone) :
Sound input through the [AUDIO
IN 2] terminals
LINK CAM :
Being linked with the change of
camera, sound input changes.
∗ Changing to the [CAMERA1 (CAMERA2)] connector input, sound comes from the
[AUDIO IN 2 (IN CAR MIC)] connector input.
(continued)
Checking audio
Sound output is normally off when
viewing live video. Use the following
steps to check that sound is input
normally.
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to
] to
select [Audio] and press [
to confirm the entry.
3. Use the [ , ] buttons to select
[Audio1 Test] or [Audio2 Test],
and then press the [
Sound is output while the [
is depressed.
Note:
The output sound may be too loud
depending on the sound volume
setting. Lower the sound volume as
required.
] to
∗
]
] button.
] button
59