Icom IC-F3162T Instruction Manual page 12

2
PANEL DESCRIPTION
TALK AROUND KEY "TA"
Push to turn the talk around functon ON and OFF.
• The talk around functon equalzes the transmt frequency to the
receve frequency for transcever-to-transcever communcaton.
WIDE/NARROW KEY "W/N"
Push to toggle the IF bandwdth between wde and narrow.
DTMF AUTODIAL KEY "DTMA"
Push to enter the DTMF channel selecton mode. Then
select the desred DTMF channel usng [CH Up]/[CH Down].
After selectng the DTMF channel, push agan to transmt
the selected DTMF code.
RE-DIAL KEY "DTMR"
Push to transmt the last-transmtted DTMF code.
9
CALL KEYS "CALL" "CALA" "CALB"
Push to transmt a 2/5-tone or BIIS ID code.
• Call transmsson s necessary before you call another staton
dependng on your sgnalng system.
• [Call A] and/or [Call B] may be avalable when your system
employs selectve 'Indvdual/Group' calls. Ask your dealer whch
call s assgned to each key.
EMERGENCY KEY "EMR"
Push and hold to transmt the emergency call.
• The emergency call transmts wth beeps; the dsplay does not
change.
• The transcever can transmt the emergency call slently or wth the
dsplay changes dependng on the pre-settng. Ask your dealer for
detals.
• If you want to cancel the emergency call, push and hold the key
agan before transmttng the call.
• The emergency call s transmtted one tme only or repeatedly untl
recevng a control code, dependng on the pre-settng.
SURVEILLANCE KEY "SURV"
Push to turn the survellance functon ON or OFF.
When ths functon s turned ON, the beep s not emtted and
the LCD backlght does not lght when a sgnal s receved or
a key s pushed, etc.
TX CODE ENTER KEYS "TXCE"
Push to enter the ID code edt mode drectly, for both 5-tone
and MSK. Then set the desred dgt usng [CH Up]/[CH
Down]. (p. 15)