Brother DCP-J100 User Manual page 53

k
Close the Jam Clear Cover.
Make sure the cover is closed correctly.
l
Put the paper tray firmly back in the
machine.
m
Lift the scanner cover (1) to release the
lock. Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
2
1
3 3
CAUTION
Be careful not to pinch your fingers when
you close the scanner cover.
n
While holding the paper tray in place,
pull out the paper support until it locks in
the open position, and then unfold the
paper support flap. Make sure you pull
out the paper support until it locks into
place.
IMPORTANT
DO NOT use the paper support flap when
printing on Legal size paper.
o
Plug the machine back into the AC
power outlet.
NOTE
If there is a repeat paper jam, a small
piece of paper may be stuck in the
machine. (See Additional paper jam clear
operations on page 47.)
Additional paper jam clear operations
a
Unplug the machine from the AC power
outlet.
b
Pull the paper tray (1) completely out of
the machine.
Troubleshooting
B
1
47
B