How To Scan A Document As A Pdf File Using The Control Panel (Windows ® And Macintosh) - Brother DCP-J100 User Manual

Chapter 6
How to scan a document as a PDF file using the
control panel (Windows
a
Load your document. (See How to load documents on page 19.)
b
Press (SCAN).
c
Press a or b to choose Scan to File.
Press OK.
d
If the machine is connected to a network
Do one of the following:
 If you want to use the default settings, press a or b to choose Off.
Press OK.
Go to step g.
 If you want to change the default settings, go to step e.
e
Press a or b to choose On.
Press OK.
f
Choose the settings for Scan Type as required. Press OK.
Repeat this step for the settings for Resolution, File Type, Scan Size and
Remove Bkg. Clr.
g
Press Black Start or Color Start.
The machine starts the scanning process.
NOTE
The following scan modes are available:
• Scan to E-mail
• Scan to Image
• Scan to File
1 2
• Web Service
1 ®
Windows users only. (Windows Vista
For more information, see Software and Network User's Guide: Scan Using Web Services from the Brother Machine
®
(Windows Vista SP2 or greater, Windows
2
DCP-J105 only
30
®
and Macintosh)
2
, press a or b to select the PC Name. Press OK.
® ®
SP2 or later, Windows 7 and Windows
® ®
7 and Windows 8).
®
8)
6