No Ink Cartridge; Out Of Memory - Brother DCP-J100 User Manual

Printers
Hide thumbs Also See for DCP-J100:
Table of Contents

Advertisement

Error Message

No Ink Cartridge

No Paper Fed

Out of Memory

42
Cause
An ink cartridge is not installed
correctly.
The machine is out of paper or paper
is not correctly loaded in the paper
tray.
The paper tray was not fully inserted. Remove the paper tray and reinstall it
Paper dust has accumulated on the
surface of the paper pick-up rollers.
The Jam Clear Cover is not closed
correctly.
The paper is jammed in the machine. Remove the jammed paper by
The machine's memory is full.
Action
Take out the new ink cartridge and
re-install it slowly and firmly until it
latches. (See Replacing the ink
cartridges on page 31.)
Do one of the following:
Refill the paper tray, and then
press Black Start or Color Start.
Remove and reload the paper,
then press Black Start or
Color Start. (See Loading paper
and other print media on page 9.)
until it locks into place, and then press
Black Start or Color Start.
Clean the paper pick-up rollers.
(See Advanced User's Guide:
Cleaning the paper pick-up rollers.)
Make sure the Jam Clear Cover is
closed evenly at both ends. (See
Printer jam or paper jam on page 44.)
following the steps in Printer jam or
paper jam on page 44.
If this error occurs often during
2-sided printing, the paper feed
rollers may be stained with ink. Clean
the paper feed rollers.
(See Advanced User's Guide:
Cleaning the paper feed rollers.)
If a copy operation is in process:
Press Stop/Exit and wait until the
other operations in process finish,
and then try again.
Press Black Start or Color Start
to print the pages scanned so far.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcp-j105

Table of Contents