How To Change The Machine's Scan Mode Settings For Pdf Scanning Using Controlcenter4 (Windows ® ) - Brother DCP-J100 User Manual

Chapter 6
How to change the machine's SCAN mode
settings for PDF scanning using ControlCenter4
®
(Windows )
Use ControlCenter4 to change your machine's SCAN mode settings.
a
®
(Windows XP, Windows Vista
Open ControlCenter4 by clicking
XXXX is your model name)/ControlCenter4. The ControlCenter4 application will open.
®
(Windows 8)
Click (Brother Utilities), and then click the drop-down list and select your model name
(if not already selected). Click SCAN in the left navigation bar, and then click
ControlCenter4. The ControlCenter4 application will open.
b
Make sure the machine you want to use is selected from the Model drop-down list.
c
Click the Device Settings tab.
d
Click Device Scan Settings.
28
® ®
and Windows 7)
(Start)/All Programs/Brother/DCP-XXXX (where
6