Ignition Switch; Engine Stop Switch; Headlight Dimmer Switch; Turn Signal Switch - Honda VT1300CX Fury Owner's Manual

If your motorcycle is stopped with the
ignition switch ON and the engine stop
switch OFF, the headlight and taillight
will remain on, resulting in battery
discharge.

Headlight Dimmer Switch

The headlight dimmer switch ( ) is used
to change between the high and low beams
of the headlight. To operate, turn the
switch to HI for high beam, LO for low
beam.
The turn signal switch ( ) is used to signal
a turn or a lane change. To operate, move
the switch all the way in the proper
direction and release it. The appropriate
turn signal lights will start blinking. To
1 cancel the light, push the switch in.
LEFT HANDLEBAR
(1) headlight dimmer switch

(2) turn signal switch

(3) horn button
Controls & Features
Turn Signal Switch
(1)
(2)
(3)
Instruments & Controls
2
HI
LO
27