Rear Suspension Damping
Refer to
Saf ety Precautions
Rebound Damping
RIGHT SIDE
(1)
(1) damping adjuster
(2) punch mark
(3) reference punch mark
on page
60
.
(2)
(3)
To adjust to the standard position:
1.
Turn the damping adjuster ( )
clockwise until it will no longer turn
(lightly seats). This is the full hard
setting.
2.
Turn the adjuster counterclockwise
approximately
3/4
punch mark ( ) on the adjuster aligns
2
with the reference punch mark ( ). This
is the standard position.
To Reduce Rebound Damping (SOFT):
For a light load and smooth road
conditions, turn the adjuster
counterclockwise toward SOFT (S).
To Increase Rebound Damping
(HARD):
For a firmer ride and rough road
conditions, turn the adjuster clockwise
toward HARD (H).
Servicing Your Honda
Suspension
1
turns so that the
3
119