Rear Suspension Spring Pre-load
Refer to
Saf ety Precautions
RIGHT SIDE
(1)
(3)
(2)
(1) adjuster knob
(2) end of adjuster knob
(3) indicator line
on page
60
.
The spring pre-load adjuster knob ( ) has
spring pre-load positions (clicks) or
35
more for different load or riding
conditions.
To adjust the spring pre-load, turn the
adjuster knob.
To adjust to the standard position:
1.
Remove the right side cover (page
2.
Turn the spring pre-load adjuster knob
counterclockwise until it will no longer
turn (lightly seats).
This is the full LOW setting.
3.
Turn the adjuster clockwise by
At that position, the end of the adjuster
knob ( ) should be aligned with the
2
indicator line ( ). This is the standard
3
position.
Servicing Your Honda
Suspension
1
75
).
6
clicks.
(cont'd)
117