Honda VT1300CX Fury Owner's Manual page 103

Coolant
LEFT SIDE
(4) bolt
(5) left rear cover
(6) prongs
96
Servicing Your Honda
(4)
(5)
(7)
(6)
(8)
(7) frame grommets
(8) reserve tank cap
2. Remove the bolt ( ).
3. Carefully pull the left rear cover ( ) out
until the prongs ( ) are clear of the
frame grommets ( ).
4. Remove the left rear cover.
5. Remove the reserve tank cap ( ).
Always add coolant to the reserve tank.
Do not attempt to add coolant by
removing the radiator cap.
6. Add coolant to the reserve tank as
required to bring the coolant level to the
UPPER level mark.
7. Install the reserve tank cap.
8. Position the left rear cover so the
prongs are aligned with the frame
grommets.
9. Push the prongs in.
10. Install the bolt.
4
5
6
7
8