If a Fuse Blows
Circuit Fuse Access:
7.
To access the circuit fuses, remove the
right side cover (page
8.
Remove the fuse box cover ( ).
RIGHT SIDE
(6)
(6) fuse box cover
9.
To check or replace a circuit fuse, pull
the old fuse out of its retaining clips.
Look for a burned wire inside the fuse.
If the fuse is blown (
7
a spare fuse (
) of the same rating.
180
Taking Care of the Unexpected
75
).
6
(7)
(7)
(7) spare fuses
8
), replace it with
CIRCUIT FUSE
(8) blown fuse
If you do not have a replacement fuse with
the proper rating for the circuit, install one
with a lower rating.
Replacing a f use with one that has a
higher rating greatly increases the chance
of damage to the electrical system.
10.
Install the fuse box cover.
11.
Install the right side cover.
(8)