Mute Function - Lenoxx CD7400 Instruction Manual

MORE FEATURES
A. SLEEP SETTING
1. PRESS & HOLD THE " SLEEP/TIMER " BUTTON, TO ACTIVE & ADJUST THE SLEEP TIMER IN THE ORDER
OF 90 > 80 >70....10 MINUTES AUTOMATICALLY.
2. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
3. TO CANCEL THE SLEEP MODE, PRESS AND HOLD " SLEEP/TIMER " BUTTON UNTIL " SLEEP " INDICATOR
DISAPPEAR.
B. TIMER SETTING (BY REMOTE HANDSET)
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY SOFT CD
MUSIC OR RADIO.
* PRESS THE " MODE " BUTTON ON REMOTE HANDSET, THE LCD DISPLAY WILL SHOW THE INFORMATION
AS FOLLOWING ORDER:-
1) CURRENT TIME
2) ON TIME SETTING
3) OFF TIME SETTING : PRESS " MEM/CLOCK ADJ. " KEY & THEN " SKIP +/- " TO SET THE TIME. THEN
4) MODE
* PRESS THE " MODE " BUTTON REPEATLY TO REVIEW THE PRESETS TIME IN ORDER.
THE PROGRAMMING WILL AUTOMATICALLY CANCEL IF NO BUTTON IS BEING PRESSED IN A PERIOD OF
ABOUT 10 SECONDS.
ACTIVE/DE-ACTIVE TIMER FUNCTION
1. PRESS THE " SLEEP/TIMER " BUTTON ONCEC & THE TIMER INDICATOR
2. TO CANCEL ALARM FUNCTION BY PRESS AGAIN "SLEEP/TIMER" BUTTON UNTIL THE TIMER INDICATOR
" " DISAPPEAR
C. PRESETS EQ FUNCTION
THIS UNIT PROVIDES 5 DIFFERENCES SOUND MODE TO ENHANCE YOUR LISTENING EXPERIENCE. YOU
CAN SELECT THE DESIRED EFFECT BY PRESSING THE "EQ" BUTTON REPEATEDLY AT FOLLOWING
SEQUENCE:-
FLAT JAZZ
D. MUTE FUNCTION
PRESS TO TERMINATE THE SOUND OUTPUT FROM SYSTEM TEMPORARILY AND PRESS AGAIN TO CANCEL
THIS MODE.
: PRESS " MEM/CLOCK ADJ. " KEY & THEN " SKIP +/- " TO SET THE TIME. THEN
PRESS " MODE " BUTTON TO STORE THE ALARM STARTING TIME.
PRESS " MODE " BUTTON TO STORE THE ALARM SWITCH OFF TIME.
: PRESS " MEM/CLOCK ADJ. " KEY & THEN " SKIP +/- " TO SET THE MODE (CD OR
TUNER). THEN PRESS " MODE " BUTTON TO COMPLETE THE SETTING.
ROCK CLASSIC POP
EN-8
IS SHOWN ON LCD