Button Description - Lenoxx CD7400 Instruction Manual

REMOTE CONTROL TRANSMITTER
CONTROL FUNCTIONS
BATTERY INSTALLATION: ( Battery not Supplied )
INSERT BATTERIES INTO THE REMOTE CONTROL BATTERY COMPARTMENT FOLLOWING THE POLARITY ( +
- ) INDICATED. THE REMOTE CONTROL REQUIRE 2 X 1,5 " AAA " BATTERY FOR OPERATION ( WE
RECOMMEND TO USE A GOOD BRAND ALKALINE BATTERIES )

BUTTON DESCRIPTION

OPEN/CLOSE
POWER
DISC 1,2,3
DISC-CH
SLEEP
TIMER
PHONO
EQ
MUTE
CD
TAPE
TUNER/BAND
VOLUME -/+
SKIP UP/DOWN
PLAY/PAUSE
STOP
REPEAT/M-UP
RANDOM/M-DOWN
MEMORY/CLK-ADJ
MODE
PRESS TO OPEN & CLOSE THE CD DOOR
PRESS TO SWITCH THE SYSTEM INTO STANDBY MODE
PRESS TO SELECT THE DISC FOR PLAYBACK DIRECTLY
PRESS TO SELECT THE NEXT DESIRE DISC AND ROTATE
THE DISC TRAY
PRESS TO ACTIVE SLEEP FUNCTION
PRESS TO SET THE ALARM MODE ON/OFF
PRESS TO ACTIVE PHONO MODE
PRESS TO SELECT EQ MODE
PRESS TO ACTIVE MUTE FUNCTION
PRESS TO ACTIVE CD MODE
PRESS TO ACTIVE TAPE MODE
PRESS TO ACTIVE TUNER MODE AND SELECT RADIO BAND
CONTROL VOLUME UP DOWN
IN CD MODE : TO SELECT PREVIOUS / NEXT CD TRACK
IN TUNER MODE : PRESS TO STEP UP/DOWN OF FREQUENCY
IN CD MODE, PRESS ONCE TO START PLAYBACK. PRESS ONCE AGAIN TO STOP THE
DISC PLAY TEMPORARILY
IN CD MODE, PRESS TO TERMINATE CD PLAYBACK
IN TUNER MODE, PRESS TO SELECT THE RADIO BAND
IN CD MODE : PRESS TO ACTIVE THE REPEAT FUNCTION
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN ORDER
IN CD MODE : PRESS TO ACTIVE THE RANDOM PLAYBACK FOR CD MODE
IN TUNER MODE : PRESS TO CALL OUT THE PRESET MEMORY IN BACK
IN STANDBY MODE, FOR CLOCK SETTING
IN TUNER MODE, FOR PRE-SETTING OF RADIO STATION INTO MEMORY
TO REVIEW AND SET THE ALARAM ON/OFF TIME
EN-9